VINTAGE KING AUDIO
R A C K 5 0 0 S I D E F E E T I N S T A L L A T I O N
WE’VE MADE IT EASY
Here are the instructions for moving the rubber feet from the bottom to the sides of your
Vintage King Rack 500. If you follow each step, it should take about 15 minutes — just be sure
to separate the screws and it’ll be a cinch. We’ve worked hard to make the instructions as
helpful as possible, but should you have questions at any step along the way, we’re here to
help at [email protected].
If you’re ready, let’s get started.
BEFORE YOU START
Unplug your Vintage King Rack 500 from the power source (VERY IMPORTANT). If you have modules
installed, remove them and unplug all audio connections to the rear panel.
Tools required
• #1 Phillips-head screwdriver
• #2 Phillips-head screwdriver
Note: Do NOT use a powered screwdriver! You will risk damaging the screws or rack.
