
15
901189 REV D 02/02/17, INST 55-59 CHEV P-UP w/ STANDARD CONTROLS EVAP KIT PG 15 OF 24
NOTE: Vintage Air Systems use 5/8” heater connections. On engines equipped with 3/4” hose
nipples, these will need to be removed and replaced with 5/8” nipples (not supplied). For water
pumps with a cast-in 3/4” heater outlet, a 3/4” x 5/8” reducer fitting (not supplied) will need
to be installed in the heater hose.
From Intake
Manifold
Figure 14
A/C and Heater Hose Routing
(1958-59 Models Only)
1.
2.
3.
Locate the #8 compressor A/C hose. Lubricate (2) #8 O-rings (See Figure 11, Page 12) and connect the 135°
female fitting to the #8 discharge port on the compressor. Then route the straight female fitting with service
port to the #8 condenser hardline coming through the core support (See Figure 14, below). Tighten each
fitting connection as shown in Figure 11, Page 12.
Locate the #10 compressor A/C hose. Lubricate (2) #10 O-rings (See Figure 11, Page 12) and connect the
135° female fitting with service port to the #10 suction port on the compressor. Then route the 90° female
fitting to the #10 evaporator hardline (See Figure 12, Page 13, and Figure 14, below). Tighten each fitting
connection as shown in Figure 11, Page 12.
Locate the #6 evaporator/drier hose. Lubricate (2) #6 O-rings (See Figure 11, Page 12) and connect the
straight female fitting with the binary switch service port to the #6 drier hardline coming through the core
support. Then route the 90° female fitting to the #6 evaporator hardline (See Figure 12, Page 13, and Figure
14, below). Tighten each fitting connection as shown in Figure 11, Page 12.
Standard Hose Kit:
1. Refer to separate instructions included with modified hose kit.
Modified Hose Kit:
Tie Wrap
Heater
Hoses
#6 Drier/Core
Hardline
095018
Safety
Switch
(Binary Type)
From Evaporator
to Water Pump
From Heater
Control Valve to
Evaporator
#6 Adel Clamp
31602-VUD
#8 Discharge
Hose
096009
#10 Suction
Hose
096010
Heater Hose
(Heater Control
Valve/Intake)
NOTE: Flow direction follows
molded arrow on valve.
#6 A/C Hose
096008
#8 Condenser/Compressor
Hardline
095017
#6 Condenser/Drier
Hardline
095016