Vintage Air 571063, Руководство пользователя

Страница: 9 / 24

9
www.vintageair.com
901239 REV B 7/03/2014, PG 9 OF 23
1. Install (2) S-clips onto center louver hose adapter (See Figure 6, below).
2. Install center louver hose adapter onto OEM center louver as shown in Figure 6, below.
Center Louver
Hose Adapter Installation
On a workbench, install evaporator rear bracket and heater hose fittings with properly lubricated O-rings
(See Figure 8, Page 10, and Figure 14, Page 14).
Install front mounting bracket onto evaporator using (2) 1/4-20 x 1/2” hex bolts, and tighten (See Figure 7,
below).
Evaporator Bracket,
Evaporator Hardline
& Heater Hose Fitting Installation
1.
2.
(2) S-clips
Center Louver
Hose Adapter
496115
OEM Center
Louver
Front Evaporator
Bracket
644117
Figure 7
Figure 6
(2) 1/4-20 X 1/2”
Hex Bolts