4
1968-69 CHEVELLE
CNTRL PNL
903068 REV B 9/18/14 , 1968-69 CHEVELLE CNTRL PNL INSTR PG 4 OF 8
1968-69 CHEVELLE CONTROL PANEL
CONVERSION KIT INSTRUCTIONS
DISCONNECT BATTERY GROUND CABLE.
REMOVE THE DASH PAD BY REMOVING (6) OEM SCREWS.(RETAIN)
LOWER STEERING COLUMN, PROTECT STEERING COLUMN WITH A CLOTH.
DISCONNECT ALL WIRE AND CABLES FROM INSTRUMENT PANEL, SPEEDOMETER, CONTROL PANEL,
AND RADIO.
REMOVE INSTRUMENT PANEL RETAINING SCREWS AT TOP, BOTTOM, AND SIDE OF PANEL.
REMOVE CONTROL PANEL FROM INSTRUMENT PANEL.
REMOVING OEM CONTROL PANEL
68 CHEVELLE SHOWN
FIGURE 1
REMOVAL OF DASHBOARD REQUIRED TO INSTALL THE CONTROL PANEL. VINTAGE AIR
RECOMMENDS THAT YOU UTILIZE THE FACTORY SERVICE MANUAL WHEN YOU DISASSEMBLE
AND REASSEMBLE THE DASHBOARD.
NOTE:
HOT
HEATER
DE-ICE
FAN
OFF
A/C
OFF
COLD
VENT
