2
www.VinsonAcoustics.com
6 ½” Polypropylene woofer with rubber surround
½” Mylar dome tweeter
Frequency Response: 60Hz—20KHz
Recommended Power: 40 watts
Impedance: 8 ohms
Sensitivity (1w/1m): 88dB
Overall Dimensions (WxD): 8.94” x 3.43”
2.0 Equipment Needed for Installation
1.0 Specifications
Speaker cutout template included in box
3.0 Installation
1. The mounting surface should be between 3/8” and 1/2”
thick with at least 3.5” clearance behind the mounting
surface. Make sure there are no wall studs or other ob-
jects to block the back of the speaker when installed.
3
www.VinsonAcoustics.com
2. Use the “speaker cutout template” provided in the box to
mark the cutout hole size and location for mounting the
speaker.
3. When running the loudspeaker cable from the amplifier
to the installation point, ensure that the cable extends
out 12” beyond the cutout.
4. When attaching the loudspeaker cable to the speaker,
ensure that the polarity is correct. Incorrect polarity can
reduce the speakers bass response.
