2
3)
Screen Saver
This setting will allow the choice to enable the Screen Saver feature or not. By
enabling this feature, a screen saver will be displayed when the system has been
idle for an extended period.
4)
Read Error Skip*
This setting will allow for the change to the number of times the system will skip
ahead when it encounters a reading error, while reading the source hard drive.
By default, the system does not skip any reading error, which would result in an
immediate job failure if any read error occurred during the duplication process.
*Enable this setting will not fix any discovered error(s); it will merely skip it and read
the remaining data of the source hard drive.
5)
Write Error Skip*
This setting will allow for the change to the number of times the system will skip
ahead when it encounters a writing error, while writing to the target hard drive.
By default, the system does not skip any writing error, which would result in an
immediate failure for such target hard drive if any write error occurred during the
duplication process.
*Enable this setting will not fix any discovered error(s); it will merely skip it and
continue write to the next data block of the target hard drive.
6)
Partition Layout
This setting will allow user to adjust various partition layout options for the target
hard drive during the duplication process under
“SMART”/”Partition”
mode.
There are two options for this setting:
Auto Ratio: The system will automatically adjust the partition layout under the
same ratio as the source hard drive.
As It: The system will set the partition layout exactly same as the source hard
drive regardless the capacity differences.
7)
Size Tolerance
Normally, the capacity of the target hard drive is required to be greater than the
source hard drive so that all of the data can be copied without loss.
However, not all hard drives have identical storage capacity, even when they are
all labeled identically in terms of GB size. Thus, by enabling the size tolerance, the
system will allow the target hard drive’s capacity to be less than the original hard
drive by the percentage specified at the risk of less data loss/corruption.
8)
Startup Menu
This setting will allow you to choose which menu you would like to see first when
you turn on the system.
