- 3 -
•
If top exhaust, cut a rectangular opening at the top of the cabinet to the
length and width of the top exhaust openings (see Fig. 2.2).
•
Mount the gaskets on the four rear mounting sides.
•
If top exhaust, place the gaskets along the top openings at the top of the
cooling unit. (See Fig. 2.3)
•
Place the cooling unit to a flat and stable place.
•
Then move it on the top of the rack temporally.
•
Move the cooling unit towards the mounting sides and push to press the
gasket.
•
Locate the 2 brackets (6) and use 7/16” wrench to tighten the 2 screws (7).
•
If top exhaust, install the top exhaust grille at the top of the cabinet with
the arrow towards the front and facing down the cabinet.
•
Plug the cooling unit in receptacle.
•
Screw the 2 screws (4) and locate the light on the ceiling.
•
Plug the light in receptacle.
•
Plug the wine cellar.
3. Electrical Cord
•
Because of potential safety hazards under a certain condition, we strongly
recommend against the use of an extension cord. However, if you still
elect to use an extension cord, it is absolutely necessary that it will be a
UL LISTED 3-wire grounding type appliance extension cord having a 3-
blade grounding plug and a 3-slot receptacle that will plug into the
appliance. The marked rating of the extension cord should be 115 V, 15 A.
