7
USA
Max. 85 kg./187 pounds (lbm)
fig. 3
Setting up
Install the cabinet in a dry place and so
that it is not exposed to direct sunlight or
any othersource of heat. Place the cabinet
in a level position. This is easily achieved
by adjusting the adjustable feet at the front
edge of the base. The cabinet may not rest
against a wall on its hinged side.When plac-
ing the cabinet on a carpet or on a wooden
floor you should adjust it once more after
some time as the cabinet might settle in soft
foundations.
If the cabinet is to be adjusted
See fig. 3. Take hold of the front panel with
both hands.Then lift up the front panel and
turn out the bottom part.
Adjust the tilt of the units by turning the
adjustable feet . (See fig. 4).
It is important that the appliance be abso-
lutely level. It can be levelled by screwing
the adjustable feet at the front of the appli-
ance up or down (fig 4).
Use a spirit level to check that the appliance
is absolutely level sideways.
If the door interferes with the
kickplate
This can be remedied by adjusting the feet
as shown on the drawing. (See fig. 5).
fig. 4
fig. 5
Содержание VT-VC130RGS
Страница 1: ...Instructions for use VT VC130RGS...
Страница 11: ...11 USA fig 11...