9
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
i n f o @ v i n o t e m p . c o m
OPERATING YOUR ICE MAKER
IMPORTANT:
Although the unit has been tested and cleaned at the factory, due to long-term
transit and storage, the first batch of cubes must be discarded.
Control Panel Buttons and LEDS
ON/OFF button
Pressing the ON/OFF button alternates between turning the ice maker on and off.
MODE button
Pressing the MODE button alternates modes between Freeze and Harvest, reflected by the
status of the Green and Yellow LEDs.
CLEAN button
This button is used in triggering the wash cycle and setting ice size.
Bin Full LED Indicator Light (Red)
This light comes on to signify that the ice storage bin is full or that something is possibly
blocking the ice-full probe. The unit will stop working. When ice cubes are removed from the
bin and the ice-full probe is freed, the red light will flash for 3 minutes and then the unit will
restart and return to Freeze mode.
Ice LED Indicator Light (Green)
This light comes on to signify that the unit is in Freeze mode. This is controlled by a
temperature probe on the evaporator. When it flashes, the unit is working in the ice making
mode controlled by a fixed timer.
Harvest LED Indicator Light (Yellow)
This light comes on to signify that the unit is in Harvest mode, controlled by the ice-full probe.
NOTE:
When both the Green and Yellow Indicator Lights are lit, the unit is in cold
preservation mode.
Ice Size Adjustment
To adjust ice cube siz
e, press and hold the “Clean” and “Mode” buttons together at the same time
for at least 3 seconds. The unit will then enter Ice Size Adjustment mode and the yellow LED will
blink continuously in this mode. Use the “Clean” or the “Mode” buttons to then select a desired ice
cube size.
