UNPACKING AND ACCESSORIES INVENTORY
1. Remove all exterior and interior packing materials. This includes the foam base and all
adhesive tape holding the accessories both inside and outside.
2. Inspect and remove any remaining packaging, tape or printed materials before turning
on the beer dispenser.
Check all supplied accessories in the carton to be sure that all pieces are present and in
good condition. A checklist of accessories is shown below for your reference. If you find
any accessories that are not in good condition or are missing, please contact our customer
service department for assistance.
1. 1 Beer Tower Including: 1 Gasket for the Beer
Tap, 1 Washer for Connection to the Keg Coupler
9. 1 Safety Guardrail
2. 1 CO2 Regulator
10. 1 Drip Tray (2 Pieces)
3. 1 Washer for Connection to the Keg Coupler
11. 4 Casters
4. 1 CO2 Cylinder
12. 1 Metal Wrench
5. 1 Keg Tap (American Sankey Type)
13. 2 Retainer Fixing Screws
6. 1 CO2 Gas Line (Red Tube)
14. 2 Wire Shelves
7. 2 Hose Clamps
15. 2 Metal Brackets
8. 1 CO2 Cylinder Retainer
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
i n f o @ v i n o t e m p . c o m
5
