7
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
i n f o @ v i n o t e m p . c o m
INSTALLATION
BEFORE USING YOUR APPLIANCE
•
Remove any exterior and interior packing material.
•
Check to be sure all parts are included including 1 owner’s manual.
•
IMPORTANT:
Before connecting the appliance to the power source, let it stand upright for
approximately 30 minutes or more. This will reduce the possibility of a malfunction in the cooling
system from handling during transportation.
•
This unit is designed to be free standing only.
•
Clean the interior surface with lukewarm water using a soft cloth
INSTALLATION OF YOUR APPLIANCE
•
This unit is designed for indoor use only. Position the unit in a dry and well-ventilated place. Avoid
placing the cooler near any source of heat or moisture, or in direct sunlight. Do NOT install the
unit in a location with an ambient temperature that will fall below 60°F.
•
For freestanding installation, 8” of space on both sides, and 4” of space at the back and top are
suggested to ensure proper air circulation.
•
Place the appliance on a flat, level surface strong enough to support it when it is fully loaded.
•
For best performance it is recommended that you install the appliance in a location with an
ambient temperature between 60°-90°F. If the ambient temperature is above or below
recommended temperatures, the performance of the unit may be affected.
•
Do not install the appliance in direct sunlight or near sources of heat or low humidity.
•
Do not store or install the appliance outdoors, in a garage, basement, or in moist areas.
•
Plug the unit into an exclusive, properly installed-grounded wall outlet.
•
Do not place heavy objects on top of the wine cooler.
