11
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
i n f o @ v i n o t e m p . c o m
SETTING A TEMPERATURE
Touch
SET
to set the internal temperature for each zone. The degree indicators will appear in
the display window marked
for UPPER ZONE and
for LOWER ZONE.
When you touch
SET
for the first time, the LED readouts will show the original temperature
settings (preset factory setting for UPPER ZONE is 50ºF / 10ºC and for LOWER ZONE is 60ºF /
16ºC).
Touch
SET
once. The left LED indicator for UPPER ZONE will flash. Then touch
UP
or
DOWN
to set the desired temperature.
When you touch
SET
again, the right LED indicator for LOWER ZONE will flash. Then proceed to
touch
UP
or
DOWN
to set the desired temperature for the LOWER ZONE.
The temperature will increase by 1°C or 1ºF if you touch
UP
once, or the temperature will
decrease by 1°C or 1ºF if you touch
DOWN
once.
To view the set temperature in either zone at any time, touch
UP
or
DOWN
and the set
temperature will temporarily flash in the LED display for 5 seconds. You can touch
SET
to view
the temperature setting from one zone to the second zone.
NOTE
: When using the unit for the first time or after a long period of inactivity, there may be a
variance of a few degrees between the selected temperature and the temperature indicated on the
LED readout. This is normal due to the length of inactivity, and will correct itself after the unit runs for
a few hours. If the unit is unplugged, has lost power or is turned off, wait 3 to 5 minutes before
restarting the unit. The unit will not restart before this time delay.
DYNAMIC COOLING/SILENT MODES
The Dynamic Cooling feature enables the relative humidity inside the unit and the temperature to be
distributed evenly around the interior so you can store all of your wine under the exact same excellent
conditions. If you would like to use the unit to store wine long term, the dynamic cooling is a must.
This will create a continuous climate in the cabinet which imitates that of a wine cellar.
In the Dynamic cooling mode, the interior fan circulates the inside air evenly until the set temperature
is reached. Dynamic Cooling is the factory preset mode. To change to Silent mode, touch and hold
the
UP
button for approximately five seconds. The wine cooler will beep three times to confirm silent
mode is on. To change back to Dynamic Cooling mode, touch and hold the
DOWN
button for five
seconds. The wine cooler will beep five times to confirm Dynamic Cooling mode is on.
STORING WINE
While bottles may vary in size and dimension, approximately 29 traditional Bordeaux 750ml bottles
can be stored in your wine cooler. You can place 10 standard bottles in the upper zone with 5 bottles
on each shelf and 15 standard bottles in the lower zone with 5 bottles on each full size shelf and 4
bottles at the bottom. Please note that bottle capacities are approximate maximums when storing
traditional Bordeaux 750 ML bottles and include bulk storage.
Содержание VT-24TS-2Z
Страница 2: ...2 2 W W W V I N O T E M P C O M ...