9
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
i n f o @ v i n o t e m p . c o m
LIGHT
To turn the light on and/or off, press the interior light button.
SETTING A TEMPERATURE
The interior control range is 45°- 64°F
The lower zone temperature can be set between 54° and 64°F, and the upper zone temperature
can be set between 46° and 54°F.
The temperature will increase by 1°C or 1ºF if you touch
UP
once, or the temperature will
decrease by 1°C or 1ºF if you touch
DOWN
once.
Upon choosing your desired temperature, the display will flash the selected temperature setting for
5 seconds before reflecting the current internal cabinet temperature.
STORING WINE
While bottles may vary in size and dimension, approximately 21 standard bottles (750ml, 12
” in length
and 3” in diameter) can be stored in your wine cooler. Please note that bottle capacities are
approximate maximums when storing traditional Bordeaux 750 ML bottles and include bulk storage.
Actual number of bottles you are able to store may vary.
CARE AND MAINTENANCE
CLEANING YOUR WINE COOLER
IMPORTANT
: Always unplug the unit before cleaning or performing maintenance. Never use harsh
cleansers or scouring pads to clean any part of the unit.
Turn off the power, unplug the appliance, and remove all items including shelves.
Wash the inside surfaces with a warm water and baking soda solution. The solution should be
about 2 tablespoons of baking soda to a quart of water. Do not use abrasive cleaners.
Wring excess water out of the sponge or cloth before cleaning control panels or any electrical
parts.
Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry
with a clean soft cloth. Clean the back and bottom of the wine cooler thoroughly to ensure
efficient operation.
Wipe dry with a soft cloth. Dry all surfaces before use
.
MOVING YOUR WINE COOLER
Before moving your wine cooler, first be sure to remove all items from the cooler.
Securely tape down any loose items, such as shelves, inside the unit.
Turn the levelling legs up to the base to avoid damage.
Tape the door shut.
Ensure that the unit stays securely in the upright position during transportation. Protect the
outside of the appliance with a blanket or similar item.
