10
W W W . V I N O T E M P . C O M
PROBLEMS WITH YOUR WINE CELLAR
You can solve many common wine cellar problems easily, saving you the
cost of a possible service call. Try the suggestions below to see if you can
solve the problem before contacting Vinotemp at [email protected]
TROUBLESHOOTING GUIDE
PROBLEM POSSIBLE
CAUSE
Wine cellar does not
operate
•
Check if unit is plugged in.
•
Check if using wrong voltage.
•
Check for broken fuse.
Wine cellar is not cold
enough
•
Check the temperature control setting.
•
Ensure the wine cooler is away from heat sources and
direct sunlight.
•
The wine cellar does not have the correct clearance on
all sides of the wine cooler.
•
Ensure door is properly closed and fans are operating
correctly.
Light does not work
•
Call the service center.
Wine cellar makes too
much noise
•
The wine cellar is not level.
•
Check the fans inside the cooler and at the back of the
unit.
•
Check for proper ventilation and clearance.
Internal light is
flashing
•
Check that selected temperature is not higher than
internal cabinet temperature.
•
Automatic defrost function has started. This is a
normal function.
Wine cooler has
started to frost
•
Excess humidity or very low temperatures may cause
frost to build. Unplug the cooler and allow it to defrost
or defrost by hand.
Door will not close
properly
•
The wine cellar is not level.
•
The doors were not properly installed.
•
The seal is weak.
•
The shelves are out of position.
Temperature LCD
display is blank
•
Main control board does not work.
•
The Power Control Board is not functioning.
•
There is some problem with the plug (no power
supply).
Temperature LCD
display error
•
Temperature sensor is cut off.
•
Display suffered too much wear and tear.
Buttons are not
functional
•
Temperature controller panel is damaged.