Vinotemp element EL-WCU102-01, Руководство пользователя

Страница: 7 / 20

•
Your appliance uses isobutane (R600a) as a refrigerant. Although R600a is an environmentally
friendly and natural gas, it is explosive. Therefore you should be careful during shipment and
installation to prevent your appliance’s cooler elements from being damaged. In the event of a leak
caused by damage to the cooler elements, move your appliance from open flame or heat sources and
ventilate the room where the appliance is located for a few minutes.
ELECTRICAL CONNECTION
Improper use of the grounded plug can result in the risk of electrical shock.
If the power cord is damaged, frayed or shows cracks or abrasions across
its length, have it replaced at an authorized service center.
For your protection, this unit is equipped with a 3-conductor cord set that has a molded 3-prong grounding-
type plug, and should be used in combination with a properly connected grounding-type outlet.
•
Do not under any circumstances cut or remove the third ground prong from the power cord supplied.
For personal safety, this appliance must be properly grounded.
•
The cord should be secured behind the unit and not left exposed or dangling to prevent accidental
injury.
•
A standard electrical supply (115V AC only, 60Hz, 15A), properly grounded in accordance with the
National Electrical Code and local codes and ordinances, is required.
•
Never unplug the unit by pulling the power cord. To disconnect the appliance, always grip the plug
firmly and pull straight out from the wall outlet. When moving the unit, be careful not to damage the
power cord.
•
The unit should always be plugged into its own individual electrical outlet with a voltage rating that
matches the rating label on the unit.
Extension Cord
CAUTION: It is strongly recommended that you do not use an adapter
or an extension cord with this unit.
7
732 S Racetrack Road,Henderson NV 89015
info@vinotemp.com