l
The first time you turn the unit on, set the temperature control to “Max”.
l
The range of the temperature control is from position “Min” to “Max”. After 2 hours, adjust the
temperature control to the setting that best suits your needs. To set middle should be appropriate for
home or office wine cooler use.
l
This wine cooler is provided with a LED light located on the undersurface of the temperature
control box. You can turn the interior light ON or OFF by pressing the light switch.
NOTE:
When using the unit for the first time or after a long period of inactivity, there may be a variance of a few degrees
between the selected temperature and the temperature indicated on the LED readout. This is normal due to the length of
inactivity, and will correct itself after the unit is run for a few hours. If the unit is unplugged, has lost power or is turned off,
wait 3 to 5 minutes before restarting the unit. The unit will not restart before this time delay.
CARE AND MAINTENANCE
CLEANING YOUR WINE COOLER
•
Turn off the power, unplug the appliance, and remove all items including shelves.
•
Wash the inside surfaces with a warm water and baking soda solution. The solution should be about 2
tablespoons of baking soda to a quart of water.
•
Wash the shelves with a mild detergent solution.
•
Wring excess water out of the sponge or cloth before cleaning control panels or any electrical parts.
•
Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean
soft cloth.
IMPORTANT
: Always unplug the unit before cleaning or performing maintenance. Never use harsh cleansers or
scouring pads to clean any part of the unit.
POWER FAILURE
Most power failures are corrected within a few hours and should not affect the temperature of your appliance. If the
power is off for an extended period of time, proper steps should be taken to protect your contents.
INACTIVITY
If the unit will not be used for a period of less than three weeks, leave the cooler operating. If the period of inactivity
is several months, remove all items and turn the unit off. Clean and dry the interior thoroughly. Leave the door open
slightly to prevent any possible moisture build-up.
MOVING YOUR WINE COOLER
•
Always unplug the wine cooler before moving.
•
Always remove all wine bottles before moving the wine cooler.
•
Securely tape down any loose items, such as shelves, inside the unit.
•
Turn the adjustable leg up to the base to avoid damage.
•
Tape the door shut.
•
Ensure that the unit stays securely in the upright position during transportation.
•
Protect the outside of the appliance with a blanket or similar item.
ENERGY SAVING TIPS
•
The unit should be located in the coolest area of the room away from heat sources or direct sunlight.
•
Ensure that the unit has proper allowances on all sides for proper ventilation. Never cover any air vents.
•
Only open the cooler door for as long as necessary. Frequent opening of the door will affect internal temperature.
11
0
