background image

SPECIFICATIONS

Wingspan:...........................1500mm (59in)
Length:...............................1350mm (53 in)
Electric Motor:.....................See next pager
Glow Engine:....................  .46 2-T / .70 4-T
RTF Weight: 3.4Kg / 7.5lbs (Will vary with
Equipment Used).
Radio:......................6 Channel / 4-5 Servos
Function: Ailerons-Elevator-Rudder-Throttle
               Retractable Landing Gear Optional

WARNING!

 This radio controlled model is NOT a toy. If modified or flown carelessly it could go out of controll and

cause serious human injury or property damage. Before flying your airplane, ensure the air field is spacious enough.
Always fly it outdoors in safe areas and seek professional advice if you are unexperienced.

ACHTUNG! 

Dieses ferngesteuerte Modell ist KEIN Spielzeug! Es ist für fortgeschrittene Modellflugpiloten bestimmt,

die ausreichende Erfahrung im Umgang mit derartigen Modellen besitzen Bei unsachgemäßer Verwendung kann
hoher Personen- und/oder Sachschaden entstehen. Fragen Sie in einem Modellbauverein in Ihrer Nähe um
professionelle Unterstützung, wenn Sie Hilfe im Bau und Betrieb benötigen. Der Zusammenbau dieses Modells ist
durch die vielen Abbildungen selbsterklärend und ist für fortgeschrittene, erfahrene Modellbauer bestimmt.

Instruction manual / Montageanleitung

Radio control model / Flugmodel

ALL BALSA, PLYWOOD CONSTRUCTION AND ALMOST READY TO FLY

VQ No: VQA096 Austria Air-force

AUSTRIA AIR FORCE TRAINER

PILATUS PC-7

TECHNISCHE DATEN

Spannweite:...................................1500mm
Lange:............................................1350mm
Elektroantrieb.............(siehe nächste Seite)
Verbrennerantrieb:...............7.45cc - 11.5cc
Fluggewicht:.......................................3.4Kg
Fernsteuerung.............6 Kanal / 4-5 Servos

VQ No: VQA097 Swiss  Air-force

SWISS AIR FORCE TRAINER

Содержание PILATUS PC-7













Отзывы: