LUTRON
Page 12
shading solutions by
VIMCO
TM
SHADE CONTROLS
Surface Mount Group Wall Keypad - SV-1PG-WH
Note:
Pressing any button while shade is moving will stop the shade.
SETTING PRESET:
1.) Use the Raise and Lower buttons until shade is at the level you wish to store as the "PRESET".
2.) Press and hold the Preset button (approximately 4 seconds) until appears in the MDU's LED display.
OPEN
PRESET
CLOSE
PRESS ONCE:
Shade goes to open
limit
PRESS ONCE:
Shade goes to close
limit
PRESS:
To lower shade
PRESS:
To raise shade
PRESS ONCE:
Shade goes to preset
level
Front View
Rear View
MDU Pin 1
CNTRL 1
MDU Pin 2
CNTRL 2
PRESS:
To lower shade
PRESS ONCE:
Shade goes to open
limit
PRESS ONCE:
Shade goes to close
limit
PRESS:
To raise shade
Note:
Pressing any button while shade is moving will stop the shade.
Split Button Open/Close Infrared Handheld Transmitter -
SV-OCIT
7
