Page 6
shading solutions by
VIMCO
TM
III. Installing Brackets
(continued)
Slide the Brackets into Place (cont’d)
3
C.
Position the brackets using the Fabric Width meas-
urement as a guide.
Note:
Use the indentation on the outer edge of each
bracket as a fabric edge indicator.
B.
While pushing the top flange as high as it will go
into the upper slot, drop the bottom flange of the
bracket into the lower slot
D.
Tighten the locking screw against the pocket ceiling
to secure the brackets in place.
Once the brackets are in place, proceed with
installing the shade(s) as instructed in the SV-
MDU-20, SV-CP, or SV-MMDP Installation Guide
(depending on the application).
Front View
Brackets
Locking
Screw
Fabric Width
