Vimar Tab 40607, Руководство пользователя, Страница: 15 / 34

15
TAB: 40607
EN
4 Settings
The Settings page, which is accessed by pressing the button on the main screen, allows you to customise
and configure some parameters of the video entryphone system. The page is divided into the following sections:
General
Displays and Buttons
Sounds
Call Options
WiFi
Mobile Devices
System
Selecting a section displays the items contained therein. To scroll through the items, press your finger on the
list and move it up or down while keeping it pressed.
Some of these sections and items (specifically referred to below) are accessible or configurable only on the
master video-intercom device.
4.1 General Information
• Primary Name (from master device only): to set the primary name associated with the user. When con-
figuring the system, the installer assigns a preliminary name to the user (e.g. "Apartment 1" ). The user
can change it later, by using the virtual keyboard on the screen to type and save the desired name (e.g.
"John Smith" ). This is the name by which the user is identified in the system contact lists. The name is
displayed in the header area of the main screen on all video entryphones belonging to the user.
• Secondary Name and Additional Names (from master device only): to set the secondary name and any
additional names or information. Information about the user is displayed by the porter switchboard as
follows:
• Reset Names (from master device only): to reset the names to the default values (e.g. "Apartment 1"
for the Primary Name, and blank for the Secondary Name and Additional Name).
•
Device ID: to set the ID by which the individual video entryphone is identified from among the user’s
devices. Each video entryphone has its own ID, which is automatically assigned during system configu -
ration (e.g. PI_60001 for the master device). The user can subsequently change it to a name of their
choice ( Entrance , Study , etc.). In the Home section of the Contacts List , each user's video entryphone
is identified by its Device ID . In the main screen, the ID appears at the bottom, next to the status icon.
•
Language : to select the language used by the video entryphone interface. The following languages are
available: Italian, English, French, German, Spanish, Greek and Portuguese .