20
TOP HUNG WINDOWS (Fig. 7)
1)
Open the package and extract the various components;
2) Fig. 8-
With a pencil draw the centreline “X” of the window frame;
3) Fig. 9-
Align the quick coupling to the centre line using as reference the rib located in the centre
of the same with the quick release side indicator on the right;
4) Fig. 10-
Position the quick coupling at a minimum height of 10 mm from the frame and mark the
drilling points;
5) Fig. 11/12-
With a suitable drill, perform two holes of Ø3.7mm on the wing and tighten the quick
coupling with proper screws;
6)
Fig. 13-
Align to the centre line the window frame connection bracket using as reference the
indicator of the centre line located in the middle of the same;
7)
Position the bracket on the frame at such a height as to align the axis of thebracket fastening seat
with the axis of the fastening holes of the quick coupling, as indicated in
Fig. 14
and mark the
drilling points;
8) Fig. 15/16-
With a suitable drill, perform four holes of Ø3.7mm on the frame and tighten the
bracket with proper screws;
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
EN
