Vimar ELVOX 7558, Инструкция по установке и эксплуатации

Страница: 46 / 60

46
TAB: 7558
EN
Switchboard scenarios
If the unit either making or receiving the call is a porter switchboard, there are other possible scenarios. For example,
the switchboard operator could connect an indoor station to another indoor station, to an outdoor station or to a second
porter switchboard.
If the switchboard operator already has the other indoor station, outdoor station or switchboard on hold, he/she will
connect it directly.
Alternatively, he/she could put this indoor station on hold while carrying out the necessary operations to call the other party.
The switchboard operator can only connect an outdoor station to the indoor station if the outdoor station is already on hold:
indoor station connected to outdoor station
During the wait, the indoor station will emit a specific tone. The indoor station can also cancel the wait by putting the
indoor station in standby mode using the
P/A key.
indoor station during the wait
During the wait, the microphone is obviously muted and will remain as such also when the switchboard operator connects
the indoor station to the other party, which means that, once connected, it will be necessary to use
T3 to re-enable
the microphone. Alternatively, you can also use T3 before the new connection is made. In this case the microphone
will already be enabled. Given that it is not possible to know beforehand the exact moment at which the switchboard
operator will connect the indoor station to the other party, this strategy has been chosen in order to ensure that the other
party hears nothing unless at the explicit request of the party waiting.