5
EN
3.
Specification
Step 5: Attach the camera to the bracket with the mounting block and then tighten the screws to fix it.
Modello
46232.012
Camera
Image sensor
1/3"CMOS
Image pixels
1920×1080
Electronic shutter
1/25 s ~ 1/100000s
Auto iris
DC drive
Min. illumination
0.1lux
Lens
optional
Mount type
CS/C mount
Image
Compression
H.264
Resolution:
1080P (1920×1080), 720P (1280×720), VGA (640×480), QVGA (320×240)
Frame rate:
1920×1080 (1~30fps), 1280×720 (1~30fps), 640×480 (1~30fps), 320×240 (1~5fps)
Bit rate:
128kbps ~ 12mbps
Encode
VBR/CBR
Quality
VBR 5 level, CBR no limit
Image config.
Saturation, Brightness, Contrast, WDR (Via IE and client end)
Interface
Internet
RJ45
Video out
CVBS (BNCx1)
Audio
Dual way audio (MIC IN×1, MIC OUT×1)
Storage
Support SD card, Max. 64GB
RS485
Support
Alarm in
1CH
Alarm out
1CH
Function
Remote surveillance IE browser, CMS remote control
Online user
6 users, support multi-stream real time transmission
Network protocol
TCP/IP, UDP, DHCP, NTP, RTSP, PPPoE, DDNS, SMTP, FTP
Storage
SD card local storage, remote storage
Smart alarm
Motion, Sensor
Day/night
ICR
PTZ
RS485×1
PoE
Yes
Infrared matrix
No
Water proof
No
Water proof
IP66
Others
Power supply
DC12V
Power consumption 4.3W
Working environment -10°C ~ 50°C, 10% ~ 90% humidity
Dimension
W70mm × D145mm × H60mm
Weight (net)
400g
Weight( gross)
520g
Step 3: Connect the power supply and video output.
Step 4: Attach the mounting block to the bracket and then install the bracket to the wall and tighten the screws to fix it as shown
below. Please make sure that the wall is strong enough to withstand three times the weight of the camera.
Manuale per l’installazione e l’uso
Installation and operation manual
46232.012
Telecamera box IP full HD passo C/CS
Camera box IP full HD C/CS mount
Mounting Block
Manuale per l’installazione e l’uso
Installation and operation manual
46232.012
Telecamera box IP full HD passo C/CS
Camera box IP full HD C/CS mount
