Vimar ELVOX 40505 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 52

Vimar ELVOX 40505 Скачать руководство пользователя страница 14

14

TAB: 40505

EN

Ringer mute

Use and to enable/disable the ringer of the internal unit,

for calls from PE,

as follows:

•

: (ringer enabled)

•

: (ringer disabled) The internal unit does not ring, but otherwise functions normally.

•

: (user absent) The internal unit does not ring and does not switch on. With configuration via

SaveProg (flag 22 ACK. Grp. Excl. S) it is possible to ring secondary ringers, otherwise the call from

external unit is rejected and unsuccessful.

When the ringer is disabled, the icon will appear at the top of the screen. In the case of 'user absent', the

icon

is displayed. 'User absent' is the same function assigned by default to

T4

when the internal unit is

in standby mode.

The ringer mute function does not apply to calls received from an internal unit or porter switchboard.

Press

T4

to confirm,

T1

to cancel without saving.

Note: in the remaining part of this manual, it is assumed that the functions of T1 and T4 are understood.

Default: ringer enabled.

«
...
12
13
14
15
16
...
»

Содержание ELVOX 40505





















































Отзывы:

Нет отзывов