Viale Vicenza, 14 - 36063 Marostica VI - Italy
Tel. +39 0424 488 600 - Fax (Italia) +39 0424 488 188
Fax (Export) +39 0424 488 709
www.vimar.com
Eikon Evo
21512.1
Touch screen colour Full Flat - 3 modules.
Device with a touch screen to be used in the By-me automation system for controlling
lights, roller shutters, air-conditioning, scenarios and speaker system. In addition, if
the system is also fitted with the load control, the device enables viewing the state of
the loads themselves. It does not handle the intrusion detection system.
•
SETTING DATE AND TIME
By touching the
icon it is possible to set the time and date to be displa-
yed. Using the
and
icons set the blinking value to bring it to the desired
time and the day, month and year and finally confirm by touching the icon
.
•
SETTING BACKLIGHTING AND CONTRAST OF THE DISPLAY
On touching the
icon the display shows the screen that enables setting the
backlighting and the contrast of the display.
The setting is made by keeping your finger on the
and
icons to reach the
desired level and then it is confirmed with
.
•
SETTING THE AUDIBLE WARNING
With the
icon our
icon it is possible to enable or disable the audible
warning (beep) that accompanies touching the icons displayed on the touch screen.
•
SETTING TEMPERATURE UNIT
With the
icon our
icon in correspondence of the wording of tem-
perature unit, you select the units in which temperature is displayed.
•
CONTROL MANAGEMENT
From the main menu, by touching the
icon, you access the screen that
enables viewing and controlling the devices configured in the rooms controlled by the
touch screen. For example:
Managing RGB lamps
The video touch screen enables managing switching on/off, adjusting/changing the
hue, saturation, and brightnessof the RGB lamps and it will also be possible to activa-
te the Fading-Show application configured on the controller by your installer.
Depending on the operating mode, the adjustment icon will be displayed as follows:
Tapping the icon
opens the screen where you make the colour settings.
• With
and
on
Saturation
you set the percentage of “vividness”
of the colour.
• With
and
on
Brightness
you set the percentage of “contrast”
of the colour.
• Tapping
confirms the settings you have made.
• Tapping the
icon opens the screen where you make the Fading-Show
settings.
The function of Fading-Show allows to set a cyclical sequence of colors (up to a
maximum of 6) for color changes and the play of light in the environments where
the lamps are installed RGB.
• With
and
on
Persistance
you set the time during which each of
the colors remains fixed.
• With
and
on
Transition
you set the time that elapses between the
passage of a gradual color to the next.
• Tapping
confirms the settings you have made.
• Tapping the
icon associated with each of the colors that make up the
sequence is going to change the color characteristics of that color; in fact will
see the following screen:
• With
and
you set the tone of color that will match the position of
the cursor to the position desired color.
• With
and
you set
Saturation
and
Brightness
.
• Tapping
confirms the settings you have made.
• Tapping
you remove the color selected by the sequence of Fading-Show
and the screen will become as follows:
• Tapping
confirms the settings you have made.
• Tapping the
icon to activate the sequence Fading-Show just set.
21512.1UEN 06 1512
VIMAR - Marostica - Italy
WARNING - Operation of the icons of activation of
the scenarios:
• Short press: Activate the scenario.
• Long press (5 seconds): storage scenario (are sto-
red and overwritten states of the groups involved
in the scenario being created).
- Lamp ON.
In this case the degree of illumination is constant (no
adjustment) and the colour is fixed.
-
Lamp OFF.
As above but with the lamp off.
-
Lamp under adjustment.
In this case the degree of illumination is adjustable (level
displayedby the scroll bar) and the colour is fixed.
-
Lamp ON in Fading-Show mode.
In this case the lamp is on and it provides the lighting
sequence configured on the controller.
