Vimar BY-ME, Руководство пользователя

Страница: 58 / 188

54
Burglar alarm system
8. BURGLAR ALARM SYSTEM.
The menu for managing the alarm system is called the SAI control panel and is active only if the
By-me burglar alarm system is installed too .
The system is managed in "zones" and "partitions"; the zones are associated with the alarm sensors
(for example bedroom IR sensor, kitchen window contact, etc.) while a group of zones is called a
"partition" (for example all of the contacts of the day zone, etc.).
The alarms displayed/signalled can be of different types:
- Intrusion alarm (intruders in the active zones of the system).
- Tamper alarm (tampering with the system devices).
- Technical alarm (for example water, gas sensor, etc.). This type of alarm does not turn on the sirens
but produces reports via GSM (if there is the communicator), closes the solenoid valves, etc.
- No mains (if there is a mains power failure, the battery back-up unit activates to power the system).
Main menu

Others (press button D on the control panel)

SAI control panel
(press button
C ).
• Press
Stop Alarm
to silence the sirens (if there is an alarm) or to reset a previous alarm.
Attention: Stop Alarm silences the sirens but does not deactivate the system.
• Press System On to activate the alarm system according to the settings assigned to the user
(select the enabled user and enter the password).
With System Off you switch off the system according to the settings assigned to the user.
• Press Alarms List to view all the alarms recorded by the system; this is useful to check the alarms
that have occurred.
Then pressing Details displays all the relevant information on the selected alarm.
Fig. 17
Events
Logout Setup
Main menu 15.01.2011 05:57
Alarm System
Video entry syst
Others
To call up
the Application
press
corresponding
Button
Setup
Stop Alarm
Menu
S.A.I. 06:00
Alarms List
System on
On/Off zone
System
off
No
Alarm