![Vimar 46260.10 Скачать руководство пользователя страница 15](http://html.mh-extra.com/html/vimar/46260-10/46260-10_installation-and-operation-manual_1027616015.webp)
13
VIMAR group
Instruction:
1 - Front board have 18 ports, Provide 16 X 10/100 Mbps downlink PoE Ethernet Ports, 2 X 1000Mbps uplink SFP Ports
2 x 1000Mbps uplink ethernet ports.
2 - LED Indicator State:
Power: 1 red light indicates that the power normal work;
POE: 16 yellow light indicates that the POE is power on;
Ethernet: 16 green light indicates that the Ethernet Link and Act;
Installation step
Please follow the following steps
- Please turn off the signal source and the device's power before installing, installation with power on may damage
the device;
- Use the network cables to connect the IP cameras with Ethernet switch's every PoE port;
- Use network cable to connect Ethernet switch’s UPLINK port with NVR or Other Device;
- Connect Ethernet switch with power adapter;
- Check if the installation is correct and device is good, make sure all the connection is reliable and power for the
system;
- Make sure every network device has power supply and work normall
Problem examination
Please remove the problem according to the following steps
- Please confirm if the device installation is correct;
- Please confirm if the RJ45 reach the standard of EIA/TIA568A OR 568B
- The maximum transmission distance depends on the signal source and cable quality, please do not over the
maximum transmission distance;
- Please replace a normal device with a failure one to check if the device is broken;
- If the problem still exist , please contact the factory.
A: 100-240 Vac input
B: 16* POE ports
C: 2* Uplink Ethernet ports
D: 2* Uplink SFP ports
EN