Permanent manual operation
Pressing the push button for manual operation, the state of the
relevant contact is permanently maintained unchanged.
On the display, near the symbol for the state of the contact, the
symbol “P” appears. The program is disconnected until the next
manual operation.
Daylight saving time setting
Pressing push button
±1h
with a pointed object, the symbol “S”
will be displayed and 1 hour time will be added to the current
time. Pressing the
±1h
push button again, the symbol “S” disap-
pears and 1 hour time will be removed from the current time.
CALL function
This particular function allows to program the time-delay switch
even in absence of supply.
To activate this function keep any
push button
(except push button “C”)
pressed for at least 2 s
.
The display will light up and it will be possible to set the current
time, the program and the holiday program. If no push button is
pressed for about 1 min, the display will switch off, storing in its
memory all selected values anyway.
The time-delay switch
incorporates a lithium battery that
allows to keep the memory, even in absence of supply, for
a period of 10 years
.
31
90716584 11-05-2000 14:20 Pagina 31
