Vimar 14195 Series, Руководство по установке

Страница: 6 / 9

Viale Vicenza 14
36063 Marostica VI - Italy
www.vimar.com Installer guide 04 1901
6.3 WiFi network extension (BRIDGE)
This configuration extends the wired network to an area that the cable and/or wireless network cannot reach directly.
SSID 1
ETH1
SSID 2 SSID 2
ETH1
SSID 2
RWF
ETH2 ETH2
Router
WiFi
To achieve this configuration, two access points must be used:
- the first, connected to the LAN network, is configured in “
Access point WiFi ” mode;
- the second is configured in “ Extension of the wired network ” mode.
Then set the SSID , the security type and the password for the access point connected to the LAN network.
The configuration is confirmed by selecting “ Save & Apply ”; if the operation is successful, the BSSID of the access point to which it is connected is displayed in the
“ Connected ” field.
It is also possible to enable the Wireless signal repeater by selecting “
Enable WiFi repeater
”; in this case, the maximum transmission speed available to extend the
radio signal is reduced (by up to half).