Viltrus Electronics MX-7 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 87

background image

15

4. SUPPORTED FUNCTIONS

4.1

Connection and communication functions

FUNCTION

DESCRIPTION

Routing

TCP/IP <> Serial

(Request/answer)

Gateway TCP/IP <> Serial (Request) enables user to read
devices data remotely. Data logger with device
communicates in sequence: Request <> Answer

TCP/IP <> Serial

(Full transparent)

Special  transparent  protocol,  for  remote  data  reading
from various devices, especially from those, which have
special  manufacturer‘s  protocol.  Transparent  data
transfer  protocol  enables  to  use  data  logger  particularly
with any device irrespective of its protocol.

TCP/IP <> Modbus

RTU

Gateway TCP/IP <> Modbus RTU enables data logger to
change Modbus TCP/IP protocol to Modbus RTU.

TCP/IP <> Other

protocols

Gateway TCP/IP <> Other protocols enables data logger
to change Modbus TCP/IP protocol to proprietary
protocol.

Ethernet <> GPRS

GPRS <> Ethernet

Routing function let‘s to expand intranet‘s possibilities.
Remote user can setup and access any device connected
to intranet over GPRS or Ethernet.

Serial

interfaces

Modbus RTU server

Modbus RTU
connection.

server is used to establish local

Modbus RTU client

This function enables data logger to get data from other
devices connected to data logger locally in Modbus RTU
protocol.

GPRS/Ethernet

Modbus TCP/IP

server

Modbus TCP/IP server is used to establish remote
connection with data logger.

Modbus TCP/IP

client

This function enables data logger to get data from other
devices connected remotely in Modbus TCP/IP protocol.

4.1.1

Modbus TCP/IP protocol

Modbus TCP/IP it is a Modbus RTU adapted for TCP. Modbus TCP/IP use TCP/IP protocol to

transfer Modbus data packets over Ethernet network. Modbus RTU packet and all his functions

(except Modbus control sum) is inserted into TCP frame and sent over 502 port, with is reserved

for use with Modbus. All Modbus TCP/IP clients and servers query and accept Modbus data over

502 port. Data security is guaranteed by TCP (Transport Control Protocol). IP (Internet Protocol)

takes care of addressing and data transferring.

Data logger is using Modbus protocol for direct data exchange with PC, by using Ethernet.

«
...
12
13
14
15
16
...
»

Содержание MX-7
























































































Отзывы:

Нет отзывов

Похожие инструкции для MX-7

Бренд: Nivus Страницы: 60

Бренд: Ebro Страницы: 18

Бренд: Emerson Страницы: 14

Бренд: Capetti Elettronica Страницы: 9

Бренд: ICP DAS USA Страницы: 7

Бренд: dataTaker Страницы: 29

Бренд: Patlite Страницы: 61

Бренд: Omega Страницы: 6

TELEMAC SMARTEC NOVA METRIX MB-3TL

Бренд: ROCTEST Страницы: 14

Бренд: Trotec Страницы: 13

Бренд: SolarMAN Страницы: 2

Бренд: SolarMAN Страницы: 3

ThermaData II Series

Бренд: ThermoWorks Страницы: 2

Бренд: ProSoft Technology Страницы: 59

Бренд: Cryopak Страницы: 19

Contactless Temperature Logger

Бренд: Cryopak Страницы: 36

Бренд: ADLINK Technology Страницы: 39

Бренд: ADLINK Technology Страницы: 73

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды