Viltrox JY-710, Руководство пользователя

Страница: 8 / 20

6
Memasang JY-710
Press the lighting/lock button ( ) briefly
to activate the control panel backlight.The
backlight will remain lit for about six seco-
nds; pressing the arrow button ( ) while
the backlight is on extends the timer for
another six seconds.
To lock all controls except the shutter-
release ( ) and Lighting/lockbuttons, pr-
ess the illuminator lock button until the
lock icon ( ) is displayed in the control
panel. To the release the lock, Please pr-
ess the lighting/lock button until the lock
icon is no longer displayed.
1.Turn the camera off.
2.Check that the “ ” ( ) and
“ ”( ) indicators are not displayed.
3.Remove and Remote cord socket termial
cover from the camera. By connecting the
camera shutter, camera will firmly connec-
ted by JY-710RX with shutter plug ( )
Bagian Produk (3/3)
After checking that the “ ” ( )
and “ ” ( ) indicators are not displ-
ayed,turn the camere off and disconnect the
JY-710. Replace the Remote cord socket te-
rminal cover.
（ not flashing ）
Timer active (page11);press
button( ).
Manual release active (page14);
release shutter-release button
( ; if botton is in position,
release shutter-release lock).
Settings can be modified (page7);
press button( ).
The
“
TIMER ACTIVE
” “
SET
”
and
“
RELEASE
”
indicator
If this flashes Expression means: Close method
TIMER ACTIVE
TIMER ACTIVE
RELEASE
SET
TIMER START / STOP
TIMER ACTIVE
RELEASE
TIMER ACTIVE
RELEASE
Disconnecting the JY-710
Lighting / Lock Button