5.1
Operation via the sensor window
Settings in Normal mode
When the Pr WC controller is in Normal mode, cleaning mode can be enabled via the
sensor window (if this mode has the status allowed in the app). To start cleaning mode, hold your
hand close to (approx. 1 cm) and directly in front of the sensor window, and remove your hand
again as soon as the feedback LED lights up (after 10 s).
Settings in Service mode
When the Pr WC controller is in Service mode, you can change the following settings via
the sensor window:
•
Select AUTO FLUSH mode
•
Enable/disable hygienic-flush
•
Select Reset (resets the WC controller to the factory default parameters)
To choose one of the settings and change it, hold your hand directly in front of the sensor window
(approx. 1 cm away) for either 5, 10 or 15 s, then remove your hand again (see table below).
42
M.VILLEROY-BOCH.COM // V 0.6 // 23.10.2020 // 921100D7
All manuals and user guides at all-guides.com