Installation
P.28
7.6 Preparation and test prior of use
1. Open the angle valve.
2. Check the power supply.
3. Make sure the power plug has been plugged in tightly.
4. Push down the earth leakage circuit-breaker.
5. Test the function of rearwash and ladywash.
Warning!
Eletrocution from touching live components!
Severe injury and even death can be the consequences.
The power plug shall be plugged in the grounded outlet, otherwise it is possible to
cause electric shock if power failure or earth leakage occurs.
Please use 220 V alternating current, otherwise product failure might occur.
