Villager VLN 1760, Оригинальное руководство пользователя

Страница: 19 / 88

Villager VLN 1760 (GB)
7
Hammer safety warnings
– Wear ear protectors. Exposure to noise can cause hearing loss.
– Use auxiliary handle, if supplied with the tool. Loss of control can cause personal injury.
– Hold power tool by insulated gripping surfaces, when performing an operation where the
cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a
"live" wire may make exposed metal parts of the power tool "live"and could give the operator
an electric shock.
Warning!
The use of any accessory or attachment, other than recommended in this instruction manual
may present a risk of personal injury. Have your tool repaired by a qualified person. This electric
tool is in accordance with the relevant safety requirements. Repairs should only be carried out
by qualified persons using original spare parts; otherwise this may result in a considerable
danger to the user.
APPLICATION
Before plugging in, make sure that the voltage and frequency of the network correspond to
those indicated on the product nameplate; and that the ON/OFF button is not blocked. The tool
is in operation, that is, is in "ON" position when the trigger is pressed and comes back to the
"stop" position when the same trigger is released. Always hold the tool firmly with both hands
on the handles while operating.
It is sometimes necessary to apply force on the point of the drill spindle so that the percussion
system can operate properly. Otherwise, the protection device against off-load operating
passes into action. Adopt a moderate workload; the using too much force reduces safety and
efficiency.
CHANGING TOOLS
Unplug the tool from the power supply, and only use drill spindles compatible with the tool.
a) Assemble the clean drill spindle before use and lightly oil. Pull and turn the lock 180 ℃
clockwise. Insert the drill spindle in the hexagonal housing, in the slot on the lock side.
Pull and turn lock 180
℃ anti-clockwise. Pull the drill spindle to check that it can only
have a translation movement of about 3 cm.
b) Dismantling process is in the reverse order to assembling.
LUBRICATION OIL LEVEL
Before checking the oil level, unplug the tool from the 230V network. The amount of oil should
be sufficient for 20 days based on a continuous use of 3 hours a day. But still, check the oil level
daily. Just before the oil level is no longer visible in the gauge window while you are holding the