Villager VLN 1076, Оригинальное руководство пользователя

Страница: 43 / 143

17
Villager VLN 1076 (GB)
9. USING THE PARALLEL GUIDE FENCE
The parallel guide fence ensures that the
planer travels parallel to the edge of the
wood, providing a straight cut at your
desired cutting width. This feature is helpful
for planing door edges, wood trim and
boards. To attach the parallel guide fence:
1. Disconnect the planer from the power
source.
2. Attach the parallel guide fence to the left-
hand side of the planer using the lock knob
(Fig. H - 1).
3. Loosen the wing nut (Fig. I - 1) on the
parallel guide fence and slide the fence to set
the desired cutting width indicated by the
width gauge. Retighten the wing nut.
NOTE: To ensure a square cut, measure the
front and back of the fence and use a square
to make sure the guide is set straight.
4. Rest the front shoe flat on the workpiece
surface and position the fence firmly against
the edge of the workpiece (Fig. I).
Fig. K
Fig. H
Fig. I
Fig. J
Cutting width
Rabbeting depth