Villager Villy 2020 E, Оригинальное руководство пользователя, Страница: 15 / 22

15
Villager Villager Villy 2020 E (EN)
Release the tightening levers (2+5) and fold the upper bar (1) and the
lower bar (3) together so that the device takes up less space. Make sure
not to pinch the machine cables while doing this.
Mounting the grass collection box
1. Clip the handle (13c) of the grass collection box (13) into the upper side of the
grass collection box (13).
2. Place the plastic tabs (13a) of the grass collection box (13) over the grass
collection box rods (13b).
Mulch kit
Attaching the mulch kit
1. Remove the grass collection box, if used.
2. Lift the impact protection.
3. Slide the mulch kit (18) into place. The bracket (18a) snaps into place.
Removing the mulch kit
4. Push in the bracket (18a) on the mulch kit and remove the mulch kit (18).
Operation
The device must only be adjusted when the motor is switched off
and the blade is stationary. There is a risk of personal injury.
Switch off the apparatus, remove the ignition key ( 10) and wait for the
blades to come to a standstill
Mounting/removing the grass collection box
1. To mount the grass collection box (13), lift the impact protection (4) and
suspend the grass collection box (13) from both receptors.
2. Fold the impact protection (4) over the grass collection box (13). This will hold
the grass collection box in the correct position.
3. To remove the grass collection box (13), lift the impact protection (4) and
remove the grass collection box (13). Fold the impact protection (4) back over
the device housing (12).