Villager VHT 710 P, Руководство пользователя

Страница: 19 / 65

Villager VHT 710 P (GB)
9
power plug.

Check your machine regularly before starting the work.

Damaged cutting blades have to be repaired or exchanged by a qualified service man before
working with the machine.

After each cutting operation, clean the cutting blade with a soft brush and cloth with lubricating
fluid oil and spray a thin layer of fluid protective oil on the completes blade.

Always keep the ventilation slots in motor housing clean.

Never clean or spray a machine with water. Clean the motor housing only with a moist cloth and
never apply detergents or solvents! These could ruin the plastic parts of the machine. Finally,
dry the motor housing carefully.

Store the machine with the supplied protection cover.

Only use original accessories and spare parts.
9. TECHNICAL DATA
Type VHT 710 P
Voltage ~Frequency
230 V

50 Hz
Power input 710 W
Blade length 600 mm
Cutting capacity 24 mm
No load speed 3200 /min
Weight 2,8 kg
10. NOISE
Noise values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
90.3 dB (A)
Acoustic power level LwA 103 dB (A)
ATTENTION! The sound power level may exceed 85 dB(A), in this case individual hearing
protection shall be worn.
aw (Vibration) 2,45 m/s
2
K=1,5 m/s
2
11. ENVIRONMENT
Should your appliance need replacement after extended use, do not discard it with the
household rubbish but dispose of it in an environmentally safe way.
Waste produced by electrical machine items should not be handled like normal household
rubbish. Please recycle where recycle facilities exist. Check with your Local Authority or retailer
for recycling advice.