Villager VCSB 12 S, Оригинальное руководство пользователя

Страница: 27 / 149

12
Villager VCSB 12 S (GB)
Charging Process Description
1. Charging operation
a) To connect the charger’s red clamp to the battery’s “+” polarity, connect the
charger’s black clamp to the battery’s “-” polarity.
b) To input the charger’s power plug to the power supply.
c) The charger’s LED display will flash to show voltage of battery.
d) Press “BATTERY SELECT” button
，
user can choose the battery’s type which
need charge. (Such as STD or AGM or GEL
）
e) Press “CURRENT SELECT” button, you can choose the charge current you need.
(such as FAST or SLOW.
f) Confirm all choice is correct. After 5 seconds, till the digital on LED display and
“Charging” indicator are long bright, it means the charger is under charging
working condition.
g) If user choose “6V” to charge a 6V battery ,after operate step a-f,the unit enter
into a normal charging condition.

If user choose “6V” to charge a 12V battery, after operate step a-f,LED display
will show “FUL”.

If user choose “12V” to charge a good 12V battery which voltage is more than
10.5V, after operate step a-f, the unit enter into a normal charging condition.

If user choose “12V” to charge a battery which voltage is less than 10.5V, the
battery charger will automatically reconditioning the battery. User can see
reconditioning indicator flashing, after 15 minutes, the unit will detect
whether the battery is good or bad. If the battery is good, it will be charged
normally. If the battery is bad, the digital display will flash “bAt”, then stop
working.

When the charger is working normally, you can press “DISPLAY SELECT”, to
check charging voltage, battery capacity percent.
h) When the charger is charged, the LED display will be show “FUL”.
2. Starting operation
a) Charge the battery for 10-15 minutes according to steps a-f in the charging
operation section above.
1.
Press the button of “ENGINE START” for 3 seconds, the indicator below
“ENGINE START” will be lighted, then you can start your vehicle and starting
current will be showed on LED Display.
2. At most for 5 seconds, the charger will stop the starting mode and turn into
rest mode. Meanwhile, for the next time to go to start mode will be count
down and showed on LED Display like: 180 – 179 – 178 - …..3 – 2 – 1.