Villager VAT WFD 1050, Оригинальное руководство пользователя

Страница: 13 / 25

Villager
VAT WFD 1050 (GB)
5
Maintain the Tool with Care
Keep the tool clean. A properly maintained tool reduces the risk of binding and is easier to control.
California Proposition 65
This product may contain chemicals known to the State of California to cause cancer and birth defects or
other reproductive harm. Wash hands after handling.
Some dust created by power sanding, sawing, grinding, drilling and other related activities contains chemicals
known to the State of California to cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
Lead from lead-based paints crystalline silica from bricks, cement and other masonry products Arsenic and
chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals, work in a well-ventilated area, and work with approved safety equipment, such
as those dust masks that are specially designed to filter out microscopic particles.
Specifications
Chuck Size ....................................... ..................................... 3/8”Max.
Pressure ............................................................................... 90 psi
Recommended airflow delivery of air compressor ≥ ........... 198 l/min @ 90 psi
Air inlet ................................................................................. 1/4” fnpt
Minimum hose size .............................................................. 3/8”
Free Speed ........................................................................... 1800 rpm
Sound pressure..................................................................... 80 dB (A)
Unpacking
When unpacking this product, check to make sure parts listed below are included and carefully inspect for
any damage that may have occurred during transit. If any part is missing and damaged, do not attempt to
assemble or use the product.
This product includes : One air drill, one chuck key and one instruction manual.
Preparation of Operation
See figure 1 for air tool set up.
Always use clean dry air. Excessive moisture and dirt will greatly reduce the lift of any air motor. We
recommend the installation of an in-line filter-regulator-lubricator as close to the tool as possible.