Say Hello to your new Vileda Steam mop!
Thank you for purchasing the Vileda Steam mop. Before you begin there are a few important things
you should know about your Steam mop. For a full overview of the features and instructions, please
review the product manual
Assembling your Steam mop
Simply click the handle and base to the body (no tools required) and attach the back of the
microfibre pad to the base of the steam mop. Further instructions on assembling your Vileda Steam
mop can be found in the manual enclosed with the product.
Using your Steam mop
When assembled, simply twist the red circular cap anti-clockwise to open the water tank, fill with 2x
200ml of clean tap water using the jug provided and close the cap, ensuring it is firmly secured. Plug
the Steam mop into the electrical socket and press the “ON/OFF” button placed on the back side of
the Steam mop to “ON”. The Steam mop will start heating up the water inside the tank. The LED will
turn green and in 15 seconds will be ready to use. The appliance may make a ticking noise when
heating up, this is normal. Regulate the desired volume of steam using the selector switch on the
front of the Steam mop.
How can I clean the microfibre pad?
Ensuring the Steam mop is powered off and cooled first, the microfibre pad can be removed from
the Steam mop by simply pulling it gently away from the base. The microfibre pad can be machine
washed at up to 60°C or alternatively hand washed. Additional pads are also available to purchase
separately. Do not use fabric softeners as this will reduce the effectiveness of the microfibre
material.
