Figure 4 the arch installation
Figure 5 Frame Installation for Front Panel
As figure 4 shows, connect the arches by
Using the hexagon bolts with washers and
nuts through predrilled holes in frame
members. And meanwhile, assemble the
tube clip for horizontal tube. Do not tighten
down the nuts completely until frame is
fully assembled and set in place.
THE FRONT AND BACK PANEL
FRAME ASSEMBLY
Step #2 --ARCH ASSEMBLY
Assemble each arch on ground. Each arches
consist of:
Two roof tubes (Part#L/L1/L2/R/R1/R2)
Two shoulder tubes (Part#2)
Two sidewall tubes (Part#3/3A/3B/3C)
Assemble the front and back panel
frame. According to Figure 5&6,
connect the end wall frame by
Using the bolts with washers and
nuts through predrilled holes in
frame members. Do not tighten
down the nuts completely until
frame is fully assembled and set in
place.
NOTE: Please notice that the
part code of the arch sections.
The sections of different
arches are not the same.
Check with the Part List and
the Sketch Figure #1.
Figure 6
Frame Installation for Back Panel
L/L1/L2
2
R/R1/R2
3/3A/3B/3C
L1
R1
2
3A
3C
28
29
29A
9
10
11
12
7
7A
30
31
3B
L2
R2
2
22
19
20
35
