Assembly Illustration
For “User Friendly” assembly we have identified each
individual component with our part code number as indicated in
part list. Please refer to the part code numbers and drawings to
ensure problem free assembly.
READ ALL INSTRUCTIONS BEFORE ASSEMBLY
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Be aware of your surroundings and leave enough workspaces. Do not set
up near snowdrifts, in slippery places, in high winds, or wet waterlogged
location.
3.
Keep children away. All children should be kept away from the work area.
4.
Don’t over reach. Keep proper footing and balance at all times.
5.
Do not assemble if under the influence of alcohol or drugs.
6.
Be aware of possible windy conditions. Consider removing the cover in
severe windy conditions.
7.
Clean off snow before entering. Do not allow snow to sit for extended
period of time.
8.
Be careful of the frame. Do not hang anything other than included parts
from the frame. Do not hang from or pull on the tubes. Do not climb on the
frame. Do not alter the frame in any way.
9.
Be careful with power and heat sources. Do not keep heat sources near the
tarpaulin. Do not expose to open flame.
10.
Be aware of personal safety during assembly and use. Be careful not to
pinch fingers by clips and tubes when assembling.
11.
Make sure there is adequate ventilation for exhaust and other dangerous
fumes.
