7
VIKING RANGE CORPORATION
111 Front St., Greenwood, MS 38930
Tel: (888) 845-4641
SERVICE MANUAL
VIKING RANGE CORPORATION
MICROWAVE OVENS
FOREWORD
This Manual has been prepared to provide Viking Service Personnel with
Operation and Service Information for the Viking Microwave Ovens.
It is recommended that service personnel carefully study the entire text of
this manual so that they will be qualified to render satisfactory customer
service.
Check the interlock switches and the door seal carefully. Special atten-
tion should be given to avoid electrical shock and microwave radiation
hazard.
WARNING
Never operate the oven until the following points are ensured:
(A) The door is tightly closed.
(B) The door brackets and hinges are not defective.
(C) The door packing is not damaged.
(D) The door is not deformed or warped.
(E) There is no other visible damage with the oven.
Servicing and repair work must be carried out only by trained service
personnel.
DANGER
Certain initial parts are intentionally not grounded and present
a risk of electrical shock only during servicing. Service person-
nel - Do not contact the following parts while the appliance is
energized;
High Voltage Capacitor, Power Transformer, Magnetron, High Volt-
age Rectifier Assembly, High Voltage Harness;
If provided, Vent Hood, Fan assembly, Cooling Fan Motor.
All the parts marked “*” on parts list are used at voltages more than
250V.
Removal of the outer wrap gives access to voltage above 250V.
All the parts marked “
∆
” on parts list may cause undue microwave
exposure, by themselves, or when they are damaged, loosened or
removed.
PRODUCT DESCRIPTION
GENERAL INFORMATION
OPERATION
TROUBLESHOOTING GUIDE AND
TEST PROCEDURE
COMPONENT REPLACEMENT
AND ADJUSTMENT PROCEDURE
WIRING DIAGRAM
PARTS LIST
VMOS201LE
VMOS201MJ
VMOS201VB
VMOS201CB
VMOS201MS
VMOS201TP
VMOS201CW
VMOS201OG
VMOS201SS
VMOS201BK
VMOS201WH
VMOS201BT
VMOS201SG
VMOS201GG
VMOS201BU
VMOS201GM
VMOS201SA
VMOS201CH
VMOS201PL
VMOS201AR
VMOS201RR
VMOS201PM
VMOS201IB
VMOS201SE
