Viking VINV600, Руководство пользователя, Страница: 2 / 8

2
VENTILATOR KIT INSTALLATION
Model VINV600 Ventilator Kit
1. Choose the correct VENTILATOR MOUNTING PLATE for your hood series. (VBCV53638 and VBCV54238 will only be
shipped with the 050722-000 mounting plate.)
2. Attach DAMPER to ventilator mounting plate, as shown. Use three (3) HEX SCREWS. Note: Damper FLANGE to be
captured by screw heads.
3. Apply (4) NEOPRENE WASHERS (supplied) to each of the mounting plate STUDS.
4. Attach BLOWER to MOUNTING PLATE with (4) 10-24 HEX NUTS.
5. Attach blower / mounting plate assembly to the hood's (4) THREADED STUDS with (4) 10-24 HEX NUTS.
6. Plug blower’s POWER CORD into RECEPTACLE inside the hood.
7. Wrap wires with wire tie (provided).
Ventilator configuration using
mounting plate 020970-000
MOUNTING
PLATE
TOP OF HOOD
THREADED
STUDS
DAMPER
HEX
SCREWS
FLANGE
RECEPTACLE
HEX NUTS
POWER
CORD
BLOWER
NEOPRENE
WASHERS
Ventilator configuration using
mounting plate 020971-000
MOUNTING
PLATE
TOP OF HOOD
THREADED
STUDS
DAMPER
HEX
SCREWS
FLANGE
RECEPTACLE
HEX NUTS
POWER
CORD
BLOWER
NEOPRENE
WASHERS
Ventilator configuration using
mounting plate 020972-000 or
050722-000
MOUNTING
PLATE
TOP OF HOOD
THREADED
STUDS
DAMPER
HEX
SCREWS
FLANGE
RECEPTACLE
HEX NUTS
POWER
CORD
BLOWER
NEOPRENE
WASHERS
STUDS
STUDS
STUDS