General Information
• All openings in the wall behind the oven
or in the floor under the oven should be
sealed.
• Keep oven area clear and free from
combustible materials, gasoline and other
flammable vapors.
• Disconnect the electrical supply prior to
servicing or cleaning.
• When removing the oven for service,
disconnect AC power supply and carefully
remove the appliance by pulling forward.
• Electrical requirements are listed in the
product specifications under the electrical
requirements section.
• DO NOT remove protective packaging
until you are ready to perform the
installation.
• DO NOT remove the protective wrapping
from the product control panel until the
product is installed.
Recommendations for
Moving
• The appliance is heavy – use extreme care
when handling!
• Only proper equipment should be used to
move products.
6
Cutout Dimensions
(Professional & Designer Series)
5
21-5
/8”
(55.0
cm
)
to
21-1
3/1
6”
(55.4
cm
)
Wiri
ng
acce
ss
15”
(38.1
cm
)
22
-1/
16
”
(56
.1
cm
) m
in.
2-3
/16
”
(5.6
cm
)
Trim
Ove
rlap
2”
(5.1
cm
)
Trim
Ove
rlap
• ALWAYS take steps to protect flooring at
the installation location when moving
products.
*
Refer to the Use & Care Manual for
properly removing the door.
C A U T I O N
This appliance is heavy – use extreme
care when handling!
W A R N I N G
DO NOT
use the handle or appliance
door to lift the appliance. Remove door
before installation to ensure that it is not
used to lift the unit.
Do not lift or carry
the door by the handle.
Electrical Requirements
3/4-wire ground, 208-240V/60Hz
No. 14 ground wire in unit; 4 ft. cord
