Viking Professional VICU105-4B, Сервисный журнал

Страница: 9 / 29

9
Surface Cooking
Operating the Single Front or Rear Element
Push in an turn the corresponding control knob counterclockwise to the desired setting.
The element will cycle on and off to maintain the desired heat setting. When finished,
turn all controls OFF.
Operating the Rear and Bridge Element
Push in and turn the corresponding control knob clock wise to desired setting. The rear
element and bridge element will cycle on and off to maintain the desired heat setting.
When finished, turn all controls to OFF.
Hot Surface Indicator Lights for Radiant Elements
The cooktop has hot surface indicator lights. They are located on the front of the glass
cooktop. The hot surface indicator light will glow red when the corresponding element is
turned on. the light will remain on until the corresponding element has cooled to a safe
temperature.
Induction LED Display
The LED display for each induction element is used for both on/off and hot surface
warning.
Internal Error Codes
LED Indicators
Description
1 Flash with brief interval between
Internal power device over temperature
3 Consecutive flashes with brief
Internal power device malfunction
interval between.
5 Consecutive flashes with brief
Power device temperature sensor
interval between malfunction
6 Consecutive flashes with brief
Coil temperature sensor malfunction
interval between
8 Consecutive flashes with brief
Inside ambient temperature too high
interval between
9 Consecutive flashes with brief
Incompatible cookware for induction
interval between