®
© 2009 Viking Preferred Service
16
1
2
2
2
1
Door Removal
In order to remove the oven doors, you will first
need to locate the hinge locking pins that were
supplied with the packing material. THE PINS MUST
BE IN PLACE in order to remove the door without
damaging the oven door or frame.
Open door completely and place pin into
the pin hole.
Using a Phillips head screwdriver, remove the left
and right hinge trim and place to the side.
With the pins in place, close the door until pins stop
door.
Lift the door up and then towards you. The door
will come off with the left and right locking pins
holding the door hinges in place. Place the door on
a protective surface.
Door Reinstallation
In order to reinstall the door, grasp firmly from each
side and align the door hinges into the receivers
on both sides of the oven frame. Allow the hinges
to gently drop into place. Open door to the full 90˚
position and remove the door pins. Reinstall the
hinge trim. Make sure to return the door pins to a
safe place should the door need to be removed in
the future.
Service Diagnostics and Procedures
