O
p
e
ra
tio
n
31
Oven Functions and Settings
30
O
p
e
ra
ti
o
n
Oven Functions and Settings
Clock Display (General)
When AC power is applied (including after a
power loss), CLOCK display shows a flashing
“12:00” and begins incremental time. Once
set, clock is “ON” or “OFF” based on user’s
last setting.
To turn “ON”:
If time is off, any key press will turn on TIME display. When
range is turned “ON” following the selection of FUNCTION or
TEMPERATURE, TIME display turns “ON”.
To turn “OFF”:
Turn the range “OFF”. If TIME is on display, a second
press of “OFF” button will turn off TIME display.
Programming Clock
(Clock defaults to 12:00 and flashes
when first powered up or if power is
interrupted.)
1. Press “CLOCK/PROBE” button. The
clock display will flash.
2. Toggle ”SELECTOR” right to increase or left to decrease to set
desired time. Time will scroll in 1 minute increments per individual
toggle. If ”SELECTOR” is held in either right or left position, time will
increase or decrease in 10 minute increments until desired time is
reached. Clock automatically rolls from AM to PM.
3. Push in ”SELECTOR” to accept time and start timer or after
5 seconds, time will auto-accept.
(When clock is set and needs to be changed, press ”CLOCK/PROBE”
button and follow the two steps above. CLOCK display will flash when
activated.)
CLOCK/
PROBE
OVEN
FUNC
OVEN
TEMP
OFF
CLEAN/
SETTINGS
MIN/SEC
TIMER
COOK
TIME
STOP
TIME
Temp Display (General)
Temperature Setting: 5ºF (2ºC) increments
Temperature Display:
Actual Temp (PREHEAT ONLY)
1ºF (1ºC) increments
Meat Probe Actual Temp
1ºF (1ºC) increments
Set Temp (all other cycles)
5ºF (2ºC) increments
Note:
PREHEAT and MEAT
PROBE are the only cycles where
actual temperature is displayed.
Otherwise display shows only
set temperature.
SET
STOP TIMER NO PROBE
COOK TIME ON DELAY
HR
MIN
AM
PM
12:00
Clock Display
888°8
00000000
Function/Temp Display
