Viking MI 422, Инструкция по эксплуатации

Страница: 130 / 388

0478 131 9923 B - EN
128
● Time-delayed mowing:
Call up the command
Start time-
delayed mowing . ( Ö 10.5)
The mowing operation starts at the
selected start time and continues until
the selected end time.
● Ending mowing manually:
A running mowing operation can be
ended at any time using the
STOP
button . ( Ö 5.1)
Secondary areas:
● Activate the robotic mower upright in
the docking station. This also activates
the docking station.
● Carry the robotic mower to the
secondary area.
● Activate the secondary area. ( Ö 10.5)
● Immediate mowing:
Call up the command
Start
mowing ( Ö 10.5).
The mowing operation starts
immediately and continues until the
selected time.
● Time-delayed mowing:
Call up the command
Start time-
delayed mowing . ( Ö 10.5)
The mowing operation starts at the
selected start time and continues until
the selected end time.
● Ending mowing:
When the selected end time is reached,
the robotic mower travels to the
perimeter wire and comes to a
standstill. Return the machine to the
docking station to recharge the battery
and confirm the displayed message.
(
Ö 23.)
A running mowing operation can be
ended manually at any time using the
STOP button . ( Ö 5.1)
14.6 Docking the robotic mower
Docking during automatic operation:
The robotic mower automatically travels to
the docking station when the active time
ends or when the battery is discharged.
Forcing docking:
● Activate the command Drive to
docking station . ( Ö 10.5)
● The red LED flashes on the docking
station after docking. (
Ö 12.1)
Manual docking:
● Push the robotic mower into the
docking station by hand.
Lift the robotic mower slightly by the
carrying handle (1) to relieve the weight on
the drive wheels. Push the machine,
resting on its front wheels, into the docking
station.
● The red LED flashes on the docking
station after docking. (
Ö 12.1)
14.7 Charging the battery
Automatic charging:
During mowing , charging occurs
automatically when the robotic mower
docks into the docking station at the end of
the mowing operation.
Starting charging manually:
● Following use in secondary areas ,
return the robotic mower to the mowing
area and dock it. (
Ö 14.6)
If necessary, the robotic mower
charges the battery in the interim
and then continues the mowing
operation until the selected end
time.
If the battery runs flat before the
selected end time, the mowing
operation is shortened accordingly.
After docking, no further mowing
operation takes place in the current
active time.
Only charge the battery via the
docking station.
Never remove the battery and
charge it using an external charger.
The red LED flashes on the docking
station after docking. (
Ö 12.1)