Viking MI 422, Инструкция по эксплуатации

Страница: 114 / 388

0478 131 9923 B - EN
112
Editing active times:
The selected active time for
automatic mowing can be disabled
or enabled using
Active time off
and Active time on respectively.
The time window can be changed
with
Change active time .
If the selected active time is no
longer required, the menu item
Delete active time should be
selected.
10.8 Mowing duration
The weekly mowing time can be set
under
Adapt mowing duration .
The set value is adapted to the size
of the mowing area. (
Ö
13.4)
Follow the instructions in the "Adapting the
programming" section. (
Ö 14.3)
The command New mowing plan
deletes all stored active times. The
step "Program the robotic mower" of
the installation assistant is called up.
(
Ö 9.9)
10.9 Information
1. Messages:
List of all active errors, faults and
recommendations; shown together
with the times of occurrence.
During trouble-free operation, the text "No
messages" appears.
The message details are displayed by
pressing the OK button. (
Ö 23.)
2. Events:
List of the last activities of the robotic
mower.
Details of the events (additional text, time
and code) can be displayed by pressing
the OK button.
3. iMow status:
Information on the robotic
mower
– Charge state:
Battery charge in percent
– Rem. time:
The remaining mowing duration during
the current week in hours and minutes
– Time and date
If the time windows for the
necessary mowing and charging
operations are not sufficient, active
times must be extended or added,
or the mowing duration must be
reduced. A corresponding display
message appears.
If completion of the reprogramming
occurs during an active time, the
robotic mower begins an automatic
mowing operation after the
individual daily plans have been
confirmed.
If certain activities occur too
frequently, your VIKING specialist
dealer will have further details.
Errors during normal operation are
documented in the messages.